[2美國直購] denkovi 中繼板 IP Relay Board 8 Channels Web， TCP/IP， Telnet， HTTP API， E-mails

IP Relay Board 8 Channels - Web, TCP/IP, Telnet, HTTP API, E-mails

This is Internet/Ethernet 8 channel SPDT relay module (board) for remote management and control with Virtual Serial Port, TCP/IP, Web, HTTP API, Telnet and serial commands access. It has 8 SPDT Relays, 8 digital inputs, 8 analog inputs and one UART port. Inputs can be adjusted to control relays (standalone work). Also inputs of one controller can control outputs of another over the LAN/WAN (box-to-box mode). It can send E-mails on inputs change as well. Suitable for remote control, home automation, data acquisition, sensor processing, alarm systems, PLC applications. Works with Home Assistant, Domoticz and OpenHAB home automation systems as well as with Node-RED IoT platform. Now with FREE Android and iOS App!

Code: DAE-RB/Ro8-12V + DAEnetIP3-ET
Weight: 0.500 Kgs

Kit specifications

10/100 Mbit Ethernet interface with Link Led. Auto MDIX
UART interface for RS232/RS485 serial connection with other such controllers. UART can be used also for configuration of the parameters
Power supply voltage, selectable during purchase:
12VDC
24VDC
Power supply consumption (max): 400mA / 12VDC (about 240mA / 24VDC)
8 SPDT relay channels (the type depends on the stocks quantity in our store):
TONGLING - JQC-3FF-S-Z (10A / 250VAC, 15A / 120VAC, 10A / 28VDC)
SUNHOLD - RAS xx15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC)
1 x 8 digital inputs. Levels: 0 - 3.3VDC
1 x 8 analog inputs (0 - 2.048VDC input range). Referent voltage: 2.048 V, resolution: 10 bits (for series after 06 Nov 2017)
On boot the outputs are set with states before reset
Built in RTC (Real Time Clock). It can be synchronized via NTP manually or automatically each 6 hours
Capacitor power backup keeps time for days during power failure
Virtual Serial Port - it may be accessed with Serial RS232 commands over TCP/IP network
Integrated WEB server with password and features like Ajax parameters reading
Telnet commands
HTTP API commands
TCP/IP ASCII protocol with optional RC4 encryption
All the network ports can be defined by the user
Supports ICMP (ping)
19 modes for I/O lines such as inverting, timer, pulses, setting output via input and switch ON/OFF according particular time (scheduling)
Any input may be referred to control any output of this or another controller in the TCP/IP network
Linearization for the analog inputs
Box-to-Box (distributed) mode
SMTP with authentication (SSL is not supported)
E-mail notifications for various events
IP address protection
Power and status led
Third party software - more info here;
Supported by Home Assistant home automation software - New;
Supported by openHAB home automation software - New;
Supported by Domoticz home automation software - New;
Supported by Node-RED IoT platform - New;
Various software examples - here;
DAEnetIP3 documentation: DAEnetIP3 user's manual

After purchase you will receive

1 x DAEnetIP3 - ET Ethernet controller - user manual DAEnetIP3_UM.pdf
1 x 8 Output Channel Relay Board - link
1 x Flat ribbon labeled cabel
3 x plastic spacers
DRM Software - Denkovi Relay Manager Software. The software is available for download from this link - setup.exe

Application examples

Remote electrical devices control
Sensor information processing (temperature, humidity, distance...)
Management/monitoring for industrial
It may be used for simple standalone web based thermostat
Remote Lock/unlock doors
Home automation
Alram applications
Standalone PLC applications
Controlling another such device over the LAN/WAN without PC (Box-To-Box)
Power Supply

Please pay attention that:

The middle pin of the power jack is +12VDC
There is not protection against reverse voltage.
We recommend to use power supply adaptor that outputs 12 VDC stabilized.
Inproper power supply voltage will damage the device!