6 Channel relay board for your Arduino or Raspberry PI - 5V
A general purpose 6 SPDT channel relay board (power supply 5VDC) for switching high-current electrical loads (both AC and DC) siuch as motors, lights, pumps, contactors and more. With this relay board, any logic-level signal from 3V up to 30V can be used to activate a relay (it may be controlled direclty by microcontroller TTL logic as well). It can be used successfully for example with PIC,AVR,ARM microcontroller, Raspberry PI, Arduino outputs and other.
Brand: Denkovi Assembly Electronics ltd.
Weight: 0.186 Kgs
Power supply - 5VDC;
Current consumption - 550mA (when all relays are ON);
6 SPDT relays - JQC-3F/T73 DC5V or RAS-05-15 (depending on your choice during purchase)*;
Maximum switching current per single relay channel:
For relay type JQC-3F/T73 DC5V (7A / 250VAC, 10A / 125VAC, 12A / 120VAC, 10A / 28VDC);
For relay type RAS-05-15 (10A / 250VAC, 15A / 120VAC, 15A / 24VDC);
Contact type: Normal Opened (NO), Normal Closed (NC);
Screw terminals for inputs and outputs;
PCB parameters : FR4 / 1.5mm / two layers / metallized holes / HAL / white stamp / solder mask;
Extra PCB openings for better voltage isolation;
Doubled high current tracks;
Protection diode for each relay;
Input voltage: 3V - 30V (1.5mA max) must be given to the "In" to switch the relay ON;
May be controlled directly by TTL;
Green leds for relay status;
Red led for power;
Dimensions: 85mm / 112mm / 20mm;
Mounting holes diameter: 3mm;
PCB dimensions - here;
*The difference between two types of relays (RAS and JQC) is that RAS relays can handle bigger amperage (15A max) while JQC can 12A max.