One Brita Basic On Tap Faucet Water Filter System, Chrome
Reduces chlorine taste and odor, lead, asbestos found in tap water
Removes 99.99% of cryptosporidium and giardia cysts
Features an extra layer to trap sediment
Filter can provide up to 100 gallons of filtered tap
Brita Basic On Tap Faucet Water Filter System attaches directly to your tap. This easy and convenient water filter system reduces chlorine taste and odor, lead and asbestos contaminants commonly found in tap water. It also removes 99.99% of cryptosporidium and giardia cysts, as well as featuring an extra layer to trap sediment. With this basic system, 1 Brita water filter can provide up to 100 gallons of filtered tap water, replacing over 750 standard 16 oz. plastic water bottles, which cuts down on waste and saves money. For optimum performance, this filters indicator tells you when to replace the filter. And with its chrome finish, this water filter system is sure to match most modern kitchen decor. Get great taste, less waste and more savings from Brita.
From the Manufacturer
Keep cleaner, great-tasting water on tap for families, kitchens and cooking. Brita On Tap filtration system attaches easily to your faucet without tools, and features an standard filter replacement indicator that flashes red when the filter should be replaced. Simply turn on the tap and enjoy fully filtered, fresh-tasting water. Customer Care Number 1-800-24.
Part Number 35618
Item Weight 0.2 ounces
Product Dimensions 2.4 x 6.1 x 8.5 inches
Item model number 10060258356189
Item Package Quantity 1
Number Of Pieces 1
Usage 1. Unscrew the aerator from your faucet. 2. Determine if you need an adapter. 3. If faucet threads are on the outside, you will most likely NOT need an adapter. Attempt to attach the system directly to the faucet. If it does not fit, call BRITA Consumer services at 1-800-24-BRITA (U.S.) or 1-800-387-6940 (CANADA). 4. If your faucet threads are on the inside, you will need to use one of the adapters and washers provided. Select the proper adapter and washer that fit your faucet. If neither fits, please call BRITA Consumer services at 1-800-24-BRITA (U.S.) or 1-800-387-6940 (CANADA). Attach the base of your system to your faucet. 6. Supporting the bottom of the base system with one hand, insert the filter cartridge into the filter cup until a "click" is heard. 5. Hold the filter cartridge above the filter cup; align the Insert Groove on the lower part of the cartridge with the corresponding groove inside the front of the filter cup. 7. A green signal will flash within 10 seconds, indicating that the filter is engaged (only for Model FF-100 with Advanced Features). 8. Turn filter handle to the filtered BRITA water setting. 9. Turn on the faucet to flush the new filter for 5 minutes. (The 100-gallon filter life begins after the 5-minute flush period) Filters should be replaced after approximately 100 gallons of filtered water or about every 4 months.
Batteries Included? No
Batteries Required? No
Warranty Description Guarantee
早期的濾水壺是使用圓形濾心。後來Brita 推出Maxtra 方形濾心。最近又推出新款的長型濾心。
以版主的使用經驗 Maxtra 的過濾速度較舊型的圓形濾心快，和新款的圓形濾心速度差不多。新款的圓形濾心因為屬於比較長型，所以水在裡面流過的面積較多也較久，所以過濾效果也比較好。