廣白蘭氏 關閉
Design Secrets for Mass Production
  • Design Secrets for Mass Production
  • 商品編號:p0189220271711
  • 店家貨號:9789574380411
  • 購買人次:0
  • 銷售件數:0

Design Secrets for Mass Production

作者: 陳正倫 John Chen
出版社: 陳正倫
出版日期: 2020/10/14

網路價
2380元 2261元 約可獲得超贈點: 22 點
活動價
2231元 /件起! 滿999元折$30 >>搶購
付款方式 點我速領1100紅包→ 還有3%回饋 星展卡友絕對不能錯過 限時滿額送2500
刷卡紅利折抵 接受20家銀行
  • 信用卡 接受信用卡刷卡
  • LINE Pay接受LINE Pay
  • ATM轉帳 接受ATM轉帳付款
  • 全家付款取貨 全家付款取貨
  • 7-11付款取貨 接受超商付款取貨
交貨方式
服務承諾 七日鑑賞期內退貨免運費
店家即時通
  • 商品詳細說明
分級標示普級
Design Secrets for Mass Production
作者: 陳正倫 John Chen
出版社: 陳正倫
出版日期: 2020/10/14
ISBN: 9789574380411
頁數: 596


內容簡介


By reading this book thoroughly:

1. You can rectify incorrect concepts as early as possible; after all, if you do it right in the first place, you will always get it right.
2. You will significantly reduce the number of times of modification, the time for repeated design modifications, as well as production and tooling modification costs.
3. You, as an inexperienced designer, can enhance your own skills without solely relying on experienced ones’ guidance.
4. You, as an experienced designer, will be enlightened at the right time to integrate your own design experience without wasting time on repetitive trials and errors.
5. You, as a design supervisor, can adopt this book as a reference for the development of internal education and training as well as design guidelines to increase design efficiency in your department.
6. You, as a project manager, can anticipate design defects and remind designers to respond in time to improve the overall product development efficiency.

作者簡介


Author:

陳正倫 John Chen
Graduating from the Department of Mechanical Engineering at the National Taiwan University of Science and Technology in 1984, I have more than 25 years of experience in product development and design. I had engaged in successful mass production of products, including telephones, test devices, palm-sized radios, PDAs, and smart phones.

Translators:
林品慧 Angie Lin
As a translator/interpreter, I believe in the power of language and communication. Aspiring to bridge the gap between different languages and cultures, I am determined to and will spare no effort to achieve my goal in life.
郭意璇 Kuo Yihsuan (Chapter 20)
Graduated from the Graduate Institute of Translation and Interpretation at National Changhua University of Education.

內容目錄


1. Problematic Designs at a Glance 1
A. Design Defects 2
B. Manufacturing Considerations 14
C. Management Issues 15
2. Low-­Cost Designs 17
A. Design Strategies 18
B. Manufacturing Choices 28
C. Management Considerations 43
3. Stable and Smooth Operation 49
A. Exploration of Principles 50
B. Examples 54
4. Delicate Appearance 63
A. Industrial Design Problems and Improvements 64
B. Control of Appearance Gaps and Steps 73
C. Delicate Appearance and Operation 93
5. Use of Elasticity and Prepressing Setting 105
A. Principles and Classifications 106
B. Examples 123
C. Prepressing Setting 128
6. Datum and Positioning 141
A. Essentials and Plane Positioning 142
B. Height Positioning 155
C. Common Positioning Problems 161
7. Gap Values and Explanations 185
A. Principles and Empirical Value of Reserved Gaps 186
B. Improvement Measures 206
8. Impacts of Deviation enlargement 225
A. Definitions 226
B. Enlargement of Lever 228
C. Enlargement of Rotation 233
D. Enlargement of Skewness 235
9. Myths of Hook Design 245
A. Definitions 246
B. Principles 251
C. Design Thinking 260
D. Troubleshooting 279
10. Screw Application 289
11. Methods of Increasing Strength 305
A. Basic Reinforcing Methods 306
B. Reinforcement in Loading Direction 324
C. Strengthening of Adhesion of Tape 339
D. Impact Protection 348
12. Important 2D Assembly Sectional Views 355
A. Purpose and Methods 356
B. Guidelines 358
C. 2D Drawing Improvements 363
13. Simulation 369
A. Overview 370
B. Drawing-­based Simulation 372
C. Mock-­up-­based Simulation 380
D. Case Study 383
14. Designs that are Hard to Control 387
A. Effective Designs 388
B. Assembly Reliability 398
C. Blind Spots in Design 402
D. Test Improvement 410
15. Differences between Mock­-Ups and Tooling Parts 413
A. Changes of Thinking 414
B. Manufacturing Issues and Know-­How of Tooling Parts 423
16. Rounds, Chamfers, and Sharp Corners 445
A. Machined Natural Fillets and Sharp Corners 446
B. Rounds 450
C. Chamfers 456
17. 6σ Design and Tolerance Analysis 459
A. Introduction 460
B. Meaning and Attitude 463
C. Design Methods and Examples 465
D. Pitfalls and Challenges 495
18. Process Capability Improvement of Factories 501
A. Design Requirements 502
B. Process Improvement of Suppliers 505
19. Parting Line 509
A. Examination of Principles 510
B. Better Choices 514
20. Technology Management 529
A. Supervisor Functions 530
B. Talent and Organization Management 541
C. Shortening of Research and Development Time 550
D. Enhancement of Design Effects 557
21. Interaction with Readers Q&A and Case Study 570
References 589

ISBN: 9789574380411
  • 9.5 店家滿意度
  • 2.1 出貨天數
  • 1.8 回信天數
  • 3.0 缺貨率%
店家即時通

消費者滿意度:9.5

商店滿意度

平均服務品質

出貨速度:2.1
回信速度:1.8
缺貨率:3.0 %

近一週瀏覽次數:57819

本店商品搜尋

商品名稱 店家貨號

價格範圍  ~ 

本店全部分類

全部商品(64649)

暢銷書2本75折(100)

童書2本75折起(532)

新書推薦(73)

活動專區(21)

一般用書(55944)

教考用書(7597)

設計文具(1229)

品牌設計包(140)

[x]
[x]

加入收藏清單

商品名稱:
標籤:(非必填)

你還可新增 個標籤 (每次新增限輸入一個,每次限10個字)
您可自訂標籤,方便資料分類與管理

常用的標籤:
資料傳輸中.