【What You Get】Floureon BM-800 microphone kits (condenser microphone+pop filter+stand) with 1 year warranty and friendly customer service.
【Reduce Noise】Shock mount to reduce handling noise, ideal for radio broadcasting studio, voice-over sound studio, recording. With standard screw adapter, you can mount the mic shock mount on the standard microphone stand included.
【Frequency】Frequency response provide vocal intelligibility, crispness and neodymium magnet for high signal-to-noise ratio. You don’t have the bother to buy one of them seperately. It’s convenient for you to get all of them in one time with a proper price.
【48V Power】It only works with device that could provide enough power with 48V phantom power adapter. If the power is not enough while being used with Amplifier or Mixer, the sound volume might be recorded very low. If better sound prefered, the sound card will be needed.
【Application】With cardiod (undirectional) pickup pattern suppress feedback and low self-noise, it suits for studios, recording studios, broadcasting stations, adage performance and computers.
1. Phantom power adapter is not included.
2. Not suit for mobile phone and tablet computer.
3. Please put the microphone away from the amplifier while recording to prevent noise recorded.
Polar Pattern: Uni-directional
Frequency Response: 20Hz-20kHz
Output Impedance: 1500Ω±30%(at 1kHz)
Load Impedance: ≥1000 Ω
Equivalent Noise Level: 16dBA
Electrical Current: 3mA
Microphone Output Interface: 3.5mm (0.14 Inch)
Usage Voltage: 48V phantom power supply
Wire: 3.5 inserted audio interface, 3 meters long
Microphone Body Weight: 0.51lb
Size: Approx. 16 x 5 x 5cm (6.3 x 1.97 x 1.97inch)
Microphone Material: Steel net + Zinc alloy hand holding part
External Diameter: 155mm(6.10inch)
Function: Reduce P-pops in recording
Double-layer Net Diameter: 130mm(5.12inch)
Tube Length: 375mm(14.76inch)
Tube Diameter: 8mm(0.31inch)
Mounting Clamp: Up to 35mm(1.38inch)(Clamp adjustable)
Flexible Holder: 360 degree swivel mount
Arm Stand Weight: 850g(1.87lb)
Each Arm: 36cm(14.1inch)
Arm Stand Support: Up to 2kg(4.41lb)
Double-braced Arms: Add strength
Features: Stable, tough, and affordable
Steel Construction: 9x9mm(0.35x0.35inch) cross-section
Mount Base: Installed onto the desk up to 55mm(2.17inch) thickness
Mount on: announcers’ desk with the metal mounting base
XLR Male to Female Microphone Cable: Pre-installed hidden inside the boom arm tubing
1x Black Microphone
1x Shock Mount
1x Power Cord
1x Anti-wind Foam Cap
1x Microphone Pop Filter Wind Screen
1x Arm Stand Body
1x Mounting Base
1x Screw Nut
1x XLR Male to XLR Female Cable
1x User Manual
Item Weight 4.2 pounds
Product Dimensions 17.4 x 11.9 x 3.8 inches
Shipping Weight 4.2 pounds
[玉山最低比價網] 日本代訂 初回版 N...
[106玉山最低比價網] 轉換燈頭燈座 ...
[玉山最低比價網] 轉換插座插頭 美規轉...
[玉山最低比價網] iRobot Ro...
[玉山最低比價網] 螢光閃光LED手環 ...